M 50-70-90 PN
This three-phase industrial vacuum cleaner is suitable for any production application: workshop, laboratory, engineering industry, cement plant, carpentry or craft store.
Do you need to change accessories during vacuuming?
No problem, the “M” series has a built-in accessory holder that allows you to always have the right accessory with you.
The powerful 4- or 4.3-kW side-channel turbine makes it possible to greatly increase the generated vacuum while keeping the size small.
The HV version of the M50 is particularly suitable for suction of grit and heavy solids, thanks to the two-stage turbine in series.
The configuration for unloading onto grating or container makes the vacuum cleaner the tool of choice for blasting operators to remove grit residue from artifacts and the work environment.
Equipped with a 100-liter capacity container that can be easily detached, built with extremely strong steels and plastics, this wheeled vacuum will stand the test of time and the heaviest applications.
The PN version model features an effective filtration system consisting of cartridges with a large filtering surface area and an innovative automatic cleaning system against air current. Particularly suitable for treating very fine dust in large quantities that could prematurely clog common filtration systems.
Available in Z22-certified version.
Food, chemical and pharmaceutical industry
General housekeeping
Particularly suitable for continuous service (even 24/24 hours), the vacuum cleaner is equipped with a 4- and 4.3-kW side-channel turbine capable of generating a very high vacuum, which is higher than that of transmission systems of similar power.
The electrical panel is integrated inside the vacuum cleaner. A vacuum gauge allows for constant monitoring of the vacuum level and filter saturation status, as well as early detection of any abnormalities.
A double silencer reduces noise and dampens the impact of outgoing air.
Polyester filter Cat. “M ANT” With manual filter shaking system. Filtration efficiency 3 microns (German BIA certificate). There is no need to remove the head and filter from the vacuum cleaner to empty the collection container.
Convenient hand-lever filter shaker helps maintain high suction performance at all times, even in continuous service or use in centralized systems.
Front suction system with Ø80 cast aluminum inlet positioned below the filter allows simultaneous suction of dust, solids and liquids (within the capacity of the container) without the need to replace or remove the filter.
The vacuumed material is deposited in a wheel-mounted steel release container(100-liter capacity), which allows for quick and dirt-free disposal of the vacuumed material, with the possibility of bagging.
Also available in an ATEX-certified version.
Data sheet
Detailed specifications and technical data. Download the complete technical data sheet to always have all the information at hand.
Download the Data sheet| M 50-70-90 PN | |
|---|---|
| Power supply | 400 - 50 3~ V - Hz |
| Power | 4 - 7,5 kW |
| Maximum depression | 3.200 - 5.100 mmH2O |
| Maximum air flow rate | 320 - 700 m³/h |
| Nozzle | 80 mm |
| Primary filter | Cartridge |
| Surface area - diameter | 57.000-106.000 cm² - 150 mm |
| Capacity | 100 lt. |
| Dimensions | 119x65x160-180h |
| Weight | 137-182 kg |