MHD 100 Industrial vacuum cleaner for heavy duty
applications and centralized vacuum systems

The new family of industrial vacuum cleaners MHD has been conceived for particularly heavy duty applications, where great suction power combined with great sturdiness and versatility of use are required.
The industrial vacuum cleaner MHD100 is suitable for heavy duty and continuous use. The large surface of the filter and the large capacity of the container allow a high working autonomy without interruptions.

Suction unit

The vacuum cleaner is equipped with a cast aluminum vacuum unit of the side channel blower type, whose impeller is fixed directly on the motor shaft, and without any transmission system. This allows to minimize the wear of the components and the consequent need of maintenance.
The control panel consists of a push-button panel containing a magnetothermal switch. A vacuum gauge makes it possible to constantly check the level of depression and the state of saturation of the filter, and to promptly detect any anomalies. A double silencer reduces noise and dampens the impact of the outgoing air.

The industrial vacuum turbine is equipped with a pressure relief valve. If the maximum vacuum is reached, for example in case of a clogged pipe, it lets external air into the turbine to cool it down.

Filter unit

Polyester filter Cat. "L" with 3 micron filtration efficiency.

It is not necessary to remove the motor head and the filter to empty the collection container.

A manual cleaning system, consisting of a vertically-moving filter shaker, allows the operator to clean the filter effortlessly and at any time, prolonging the life of the filter itself, preventing saturation and keeping the suction performance of the machine constant. The tangential suction system with Ø120 cast aluminum inlet positioned under the filter allows the simultaneous vacuum of powders, solids and liquids (within the capacity of the container) without the need to replace or remove the filter.

Collection unit

The vacuumed material is deposited in a steel release container mounted on wheels (capacity 160 liters), which allows for quick disposal of the suctioned material without getting dirty.

These machines can also be used as fixed units for centralized suction systems.

Also available in atex certified version.

Available model in PN version with an effective filtration system consisting of large filter surface cartridges with innovative automatic pneumatic cleaning system. Particularly suitable for treating very fine dust and in large quantities that could clog the common filtration systems at an early stage.