Chipvac 400 oil and chip vacuum with tilting discharge
The Chipvac 400 chip vacuum cleaner from the Oil & Chips range combines DUPUY’s decades of experience in mechanical engineering and unique, innovative elements from our continuous research and development work in one machine.
This Chipvac 400 chip and residue suction bucket has a large capacity for collecting solids and liquids with the option of adding a metal separation grid.
Possibility of 50° tilting by forklift with a simple and effective patented system.
The vacuum cleaner can be equipped with two different powerful blowers, 7.5 and 12.5 kW, which allow large amounts of chips to be collected in a very short time. The new design allows the chip vacuum to be moved very easily along with its turbine, either on wheels or with a forklift. Before tipping the bucket, the turbine can be easily detached thanks to its separate holder.
The vacuum cleaner is mounted on a sturdy powder-coated steel frame, equipped with non-marking swivel wheels and a parking brake.
The vacuum cleaner is equipped with a powerfulside channel blower that develops a high flow rate and vacuum and is suitable for continuous operation. The electric motor is directly coupled to the fan body and requires no maintenance. The air outlet is directed upward so as not to disturb the operator or raise dust in the environment. The vacuum unit is controlled by a low-voltage electrical panel housed in the easily accessible rear hood. The panel and motor are protected to IP65 standard.
The suction unit is equipped with a vacuum shut-off valve as standard. In the case of suction with the inlet fully closed, the valve ensures that the turbine is cooled by the inlet of ambient air.
Inside the steel filter chamber is the Cat.L polyester pocket filter, which protects the suction unit, ensures high dust retention and guarantees the purity of the exhaust air due to a large surface area (3 m2) and high filtration efficiency (3 microns). A manual cleaning system, consisting of a vertically moving filter shaker, allows the operator to clean the filter effortlessly at any time, extending filter life and preventing it from becoming saturated and reducing suction performance. The suction system with a Ø80 inlet below the filter allows simultaneous suction of dust, solids and liquids (within the capacity of the container), without having to replace or remove the filter.
The vacuumed material is deposited in a large-capacity tipping container. The use of a forklift makes it easy to empty the vacuumed material directly into waste containers. The CHIPVAC 400’s 50° inclination of the suction bucket makes it easy to unload even the most difficult materials.
A perforated grid can be inserted to separate the chips, leaving them at the top of the bucket, while the liquids settle at the bottom of the container.
The bucket is equipped with a 2″ ball valve for emptying sucked liquids. A visual level indicator allows the filling of the bucket to be checked during the liquid suction operation.
Data sheet
Detailed specifications and technical data. Download the complete technical data sheet to always have all the information at hand.
Download the Data sheet| Chipvac 400 oil and chip vacuum with tilting discharge | |
|---|---|
| Power supply | 400 - 50 3~ V - Hz |
| Power | 7,5 - 12,5 kW |
| Maximum depression | 4.400 - 4.000 mmH2O |
| Maximum air flow rate | 1.100 - 700 m³/h |
| Nozzle | 80 mm |
| Primary filter | Pockets |
| Surface area - diameter | 30.000 cm² - 560 mm |
| Dimensions | 147x105x207h |
| Weight | 490 - 555 kg |